User Accessible Option Codes
COMPULOAD 3000 Series
Version CL3V1.16 Mod 11/05/.2004
3 USER ACCESSIBLE OPTION CODES
(Also see Code Protected Options)
3.1 Press FUNC “External trigger task”
(Not normally used
in static mode)
Allows the external trigger to preform the following tasks
a) HOLD and ADD Weight is “held” on display for a pre-determined period. Weight is automatically added into the TOTAL display.
b) HOLD ONLY Weight is “held” on display for a pre-determined period. Weight can be added into the TOTAL display with LOAD key
c) DOES NOTHING No action from lift sensor.
Use UP/DOWN keys to scroll through options. Press LOAD to save selection.
3.2 First Press LOAD “Alarm Weight”
Allows operator to set a target weight to cause an alarm to sound when target “Total” is reached. Set at zero to turn alarm weight “off”. Use UP/DOWN to set required weight Press LOAD to confirm
3.3 Second PRESS “Tare Weight”
Allows a ‘tare’ weight to be entered . Weight is displayed in NETT mode.
3.4 Third PRESS “Optional Printer”
Turns external printer (if fitted) ON / OFF. Use UP / DOWN keys to select. Press LOAD to save selection.
3.5 Fourth PRESS “Grand Total Print”
Allows a progressive grand total to be printed on each ticket (if printer fitted) Use UP / DOWN to select. Press LOAD to save selection.
3.6 Fifth PRESS “View Grand Total”
Allows operator to “view” progressive day total.
When weight is displayed it can be reset with ZERO key.
NOTE Codes and values are entered using the UP/DOWN
and hold the UP key numbers will go 0-10 in units 10-100 by tens
by hundreds. When number under required amount is reached
seconds and cursor will jump one digit to right allowing required
to be reached.
Top of Page