|
|
|
OPERATING INSTRUCTIONS
Code Protected Options
COMPULOAD 3000 Series
Version CL3V1.16 Mod 11/05/.2004
Options Access Method
- The following options are available to the operator if required and as required.
- They are entered by pressing FUNC key.
- Use UP/DOWN keys to alter setting and then by pressing LOAD saves the setting and proceeds to the next function.
- Pressing CLEAR exits the function mode without altering the setting.
4 | CODE PROTECTED OPTIONS
Require a code to be entered to allow access |
3.1 Sixth | PRESS “Overload Allowed”
Allows alarm weight set above (3.2) to be exceeded by a percentage. ie. An overload allowed set at 1% would allow a 10.00t load to totalise to 10.10 before alarm sounds |
4.2 Seventh | PRESS “Set Channel”
Allows channel to be changed to allow the COMPULOAD 3000 to be re-fitted to another machine or weigh in a different method. Use UP/DOWN to select Channel number Press LOAD. |
3.2 | “Fine Adjust of Span”
Allows fine adjustment of accuracy of weighing system. Can be increased or decreased by a percentage as required. Use UP / DOWN to alter. Press LOAD to save. |
3.3 | “Set Time”
Press FUNC then use UP/DOWN keys to set the time. Press LOAD to save. |
3.4 | “Set Date”
Press FUNC then use UP/DOWN keys to set. Press FUNC to save. |
Top of Page |